Tip of the day

[Gotfish?]

Like exposed hook underspins but don't like how they snag easily? Have a bunch of old underspins already? Add a jig spinner for more flash and weedless performance. Has worked well at Barrett for largemouth and San Diego Bay for spotties.

You could buy https://www.tacklewarehouse.com/Flatlan ... aAQAvD_BwE or just make your own as described above. In my case, I already had some old Roadrunner underspins and a few jig spinners so I gave it a try. For the tail, I used a 2.5" Z-man swimbait tail (Slim Swimz) secured with a dab of superglue. Casts further than a spinner bait of the same weight due to not having a silicone skirt.

[Gotfish?]

Anyone else get an itchy rash in the ankle area from long float tube days? The only thing I found to prevent it is a stiff beeswax product such as https://www.amazon.com/dp/B006UIUGVE?re ... in_title_1 . Bike chamois lube, petroleum jelly, anti-chafe balm and body glide all helped but not enough. I also wear low friction socks such as Wright double layer socks.

I have not tried putting bread sacks over socks, that might work too. The beeswax also works if you get chafing on the bottom of the thighs.

[kirkboat]

corn starch.

[Gotfish?]

corn starch.

Not sure if that would work as the feet and socks are usually quite damp or even wet after hours in the float tube, either from sweat or microleaks.

[Gotfish?]

Some things I do with my rods:
1. Add heat shrink tubing around the tip to prevent tangles. Get some just big enough to slip past the tip and apply heat to shrink it over any edges that catch the line. You could also replace the tip with something like https://www.amazon.com/LINGUANG-Profile ... 9hdGY&th=1 but the heat shrink tubing works very well, maybe even better.
2. Add a fore grip. Many bait casting rods do not have foregrips as they intend you to palm the reel. But holding by the foregrip is better for fighting fish and better for feeling the line between the thumb and forefinger to detect bites. I use bicycle handlebar tape and vinyl electrical tape for this.
3. Once the foregrip is added, you will need to add a hook holder to replace the one that is covered up. I prefer the dropshot style, even to the point of putting it on rods that already have a foregrip but don't have that style of holder. That style is nice for Texas rigged baits too. I just use nylon sewing thread and clear nail polish to put in on. https://mudhole.com/products/dropshot-h ... YFRPrIVTjA

[Gotfish?]

My new favorite toy is a thread burner. Works better than scissors for cutting braid and better than specialty glue for fixing soft plastics. No fraying on cut braid either. Works for cutting thread too.

https://www.amazon.com/dp/B093QQ3M5J?re ... asin_title Many other similar brands available.

[Midnightpass]

My new favorite toy is a thread burner. Works better than scissors for cutting braid and better than specialty glue for fixing soft plastics. No fraying on cut braid either. Works for cutting thread too.

https://www.amazon.com/dp/B093QQ3M5J?re ... asin_title Many other similar brands available.

I like it… Great idea…
Butch

[Bendo]

I run two Checklists. One for making sure I have everything I need to go fishing, the other is for everything I need to launch the Boat,Kayak,Tube. Saved me many times.

[Gotfish?]

I run two Checklists. One for making sure I have everything I need to go fishing, the other is for everything I need to launch the Boat,Kayak,Tube. Saved me many times.

I went to Lower Otay early one morning, put the waders on and the tube in the water. Then realized I left the fins at home. I have used a checklist since then.

[vito1023]

Of course all of us have lots and lots of tips but one of the tips that just comes to mind is something my father taught me years ago when I was young.
Before each fishing trip, he taught me to always cut about a foot or so off the line and retie whatever you had previously had tied on your line. He said that rocks and things on the bottom, especially when you worm fish, scratch and cut into the line so it is more likely to break when you set the hook or try to reel in a fish. I actually pull out a number of rods the night before I go fishing and always cut back and retie everything. It is just become a habit and especially on the rods I use more often. Even on my flippin' rods(but not as often as I should) I cut and retie because I use straight braid tied to a jig or Tokyo rig, for example and that line takes a beating throwing baits all the time in cover. I fish pretty often and I rather a fish break the line naturally rather than because I was too lazy to cut the line back a little and retie.

Do you use braid all the time or just when flipping or do you use a leader with flouro or mono?

[VinnyBass]

Of course all of us have lots and lots of tips but one of the tips that just comes to mind is something my father taught me years ago when I was young.
Before each fishing trip, he taught me to always cut about a foot or so off the line and retie whatever you had previously had tied on your line. He said that rocks and things on the bottom, especially when you worm fish, scratch and cut into the line so it is more likely to break when you set the hook or try to reel in a fish. I actually pull out a number of rods the night before I go fishing and always cut back and retie everything. It is just become a habit and especially on the rods I use more often. Even on my flippin' rods(but not as often as I should) I cut and retie because I use straight braid tied to a jig or Tokyo rig, for example and that line takes a beating throwing baits all the time in cover. I fish pretty often and I rather a fish break the line naturally rather than because I was too lazy to cut the line back a little and retie.

Do you use braid all the time or just when flipping or do you use a leader with flouro or mono?

I found that it’s a lot better for me to use just straight braid. I mean if you’re using 30 pound braid and you’re using a 10 pound leader and the leader snaps, you lose a fish that you probably would’ve caught if you didn’t have a leader.

[Midnightpass]

I run two Checklists. One for making sure I have everything I need to go fishing, the other is for everything I need to launch the Boat,Kayak,Tube. Saved me many times.

I have a different check list for about every kind of trip I do... Morning surf fishing, camping, road or air flight trip... It's on an Excel spreadsheet, and gets updated most every trip... Maybe, except, the morning surf fishing trip, that doesn't vary much... I print it, then I just scratch off what isn't applicable that particular trip.. If it's not on the list I WILL forget it...
Butch