Anybody work on Ulterra TM

For boat owners and prospective buyers to talk about owning and operating boats, as well as maintaining, repairing and rigging them. Also a place to discuss fishing boat makes and models.
Post Reply
User avatar
Dfishin
Mega Pro Angler
Posts: 184
Joined: Wed Jun 14, 2023 3:49 pm
Location: San Diego
Has thanked: 387 times
Been thanked: 252 times

Anybody work on Ulterra TM

Post by Dfishin »

I have a 2020 Ulterra 24 volt 80lb that is loosing the heading sensor and some times the remote.
Done everything Minn Kota had me do.

If you know of anybody please let me know.

Thanks
David
User avatar
professionull
Mega Pro Angler
Posts: 165
Joined: Sat Apr 22, 2023 7:17 am
Has thanked: 68 times
Been thanked: 110 times

Re: Anybody work on Ulterra TM

Post by professionull »

Sounds like you need to replace the head unit
So Cal Flats Fishing
Angler
Posts: 1
Joined: Sat Mar 15, 2025 5:12 pm
Location: Huntington Beach
Has thanked: 1 time
Been thanked: 1 time

Re: Anybody work on Ulterra TM

Post by So Cal Flats Fishing »

Just went through this with my Riptide 24v 80#. Took it to Nick at The Trolling Motor Doctor and diagnosed it as needing the head unit.
User avatar
Dfishin
Mega Pro Angler
Posts: 184
Joined: Wed Jun 14, 2023 3:49 pm
Location: San Diego
Has thanked: 387 times
Been thanked: 252 times

Re: Anybody work on Ulterra TM

Post by Dfishin »

Thanks! I did order a new head unit as that is what I think also.
User avatar
Dfishin
Mega Pro Angler
Posts: 184
Joined: Wed Jun 14, 2023 3:49 pm
Location: San Diego
Has thanked: 387 times
Been thanked: 252 times

Re: Anybody work on Ulterra TM

Post by Dfishin »

I think it is fixed now. 2 things going on, 1 is the 2 motor wires in the head unit connection was not good even though it looked good. Took them apart and cleaned connection and put back together. Why! I don't know, but bluetooth would go in and out when wiggled. 2 is the head sensor was bad. Replaced it on the water and had no issues rest of the day. I did wires one day and sensor another day. Time will tell.
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests